When investing substantially in a swim spa, new owners want the unit to have an extended lifespan. That involves a maintenance routine for which the system manufacturer can provide guidance to encourage water health and reduce repair costs.
A swim spa’s longevity depends on its care and upkeep. As a rule, a well-maintained unit can last as long as 20 years. Variables such as water balance can lead to damage to the system if, for instance, the pH and alkaline levels are left unbalanced.
Before Swim Spas in Livonia are set up, researching an appropriate maintenance routine and developing a schedule to suit your lifestyle should be prioritized. A well-established, disciplined plan will allow full enjoyment and maximize the unit’s lifespan.
Primary Components of a Swim Spa Maintenance Regimen
A primary consideration when making a substantial investment in a Livonia swim spa is how to get the most out of that investment. For new owners, the priority is to become familiar with proper maintenance to allow smooth operation and healthy use for an extended lifespan.
You can gain insight into what should be included in a maintenance regimen between the supplier and the manufacturer.
Visit https://funfitnessafter50.com/3-tricks-to-help-you-when-swimming-in-your-swim-spa/ to learn tips when using your swim spa. Then follow below for four aspects of care recommended to be regularly scheduled for optimum health of the swim spa.
Maintain clean water
Water levels must be routinely tested to maintain balance and avoid potential damage to the equipment. The recommendation is to test roughly every two days and treat the water as needed. When testing, the chemical levels should be checked.
This includes the pH and alkaline levels in particular. For a more straightforward process, test strips are available that provide results for each level. Digital meters are an investment that will also offer an accurate and all-inclusive chemical reading.
The pH level range is between 7.2 and 7.8, while alkaline falls between 80 and 100 ppm- parts per million. If you use chlorine or other chemicals, they should be tested. Chlorine must be roughly between 2 and 4 ppm, while bromine should be between 3 and 6 ppm.
For healthy water, an oxidization treatment is recommended to help the sanitizer work more efficiently by breaking down organic materials that the chlorine is unable to.
New owners are advised to leave the pool cover off for approximately 30 minutes following water treatments to allow the chemicals to off-gas without impacting the water or the cover.
Filter cleaning
The filters must remain clean since these act as a barrier between bacteria and debris and the water. Maintaining the filters will ensure the system does its job and keeps the water healthy. For optimum efficiency, these require consistent maintenance with cleaning each week, once a month, and every three months.
In the weekly process, the filters should be rinsed with a hose and thoroughly dried before putting them back in place.
A filter solution should be applied every month keeping the filter soaking for approximately 30 minutes. The filters will then be thoroughly rinsed clean and left to dry before putting them back in place.
The three-month cycle involves removing the filters and soaking them in a diluted filter and water solution for roughly 24 hours before thoroughly rinsing and drying. They can then be returned to the swim spa.
Filters’ lifespan runs for 12 months before they must be replaced. When undergoing the cleaning process, they should be thoroughly inspected for damage and replaced with new filters if issues are found.
Changing water
Water changes with the swim spa will depend on how frequently it’s used and the precautions followed with each use. At the very least, water should be changed every six months. Chemicals build up over time in the water as you treat it, but the filtration system keeps the water clean.
Still changing it regularly will ensure clarity and prevent an overabundance of chemicals from developing. The recommendation is to perform a partial drain at three months with roughly ¾ of the water drained. This will help dilute a potential chemical buildup, keeping the water safe for use.
With the six-month water change, the spa will be fully drained to allow for a deep clean and refill with fresh water. Read here for details on the new spa installation.
Inspect the shell and deep clean
When the water is changed, a deep, thorough clean and inspection of the shell for potential damage is encouraged. When cleaning, a microfiber soft cloth and high-grade cleaner will remove debris and surface buildup. It also can protect from corrosion and damage in the future.
Once the cleanser has been applied, the shell should be thoroughly rinsed to allow an inspection for possible cracks. You want to catch these early to avoid significant problems from damage that could be overlooked.
Once the shell appears clean and you’re confident there’s no damage, the water can be added and rebalanced. If you don’t feel comfortable with this step, reach out to schedule a service appointment so a Livonia technician can handle this aspect of maintenance for you.
Read more: https://timesboat.com/
